GB/T 14445-1993 Hard Alloy Products for Coal Mining Tools
GB/T 2077-1987 Carbide Indexable Inserts Corner Radius
GB/T 2079-1987 Carbide Indexable Inserts Without Holes
GB/T 2081-1987 Carbide Indexable Milling Inserts
GB/T 1481-1998 Determination of Compressibility in Uniaxial Compression of Metal Powders (Excluding Carbide Powders)
GB/T 5166-1998 Determination of Elastic Modulus for Sintered Metal Materials and Carbides
GB/T 9096-2002 Impact Test Method for Sintered Metal Materials (Excluding Carbides)
GB/T 9097.1-2002 Determination of Apparent Hardness of Sintered Metal Materials (Excluding Carbides) Part 1: Materials with Uniform Section Hardness
GB/T 5319-2002 Determination of Transverse Rupture Strength for Sintered Metal Materials (Excluding Carbides)
GB/T 6480-2002 Carbide Drill Bits for Rock Drilling
GB/T 17985.1-2000 Carbide Turning Tools Part 1: Codes and Marks
GB/T 17985.2-2000 Carbide Turning Tools Part 2: External Surface Turning Tools
GB/T 17985.3-2000 Carbide Turning Tools Part 3: Internal Surface Turning Tools
GB/T 18376.2-2001 Carbide Grades Part 2: Carbide Grades for Geological and Mining Tools
GB/T 18376.3-2001 Carbide Grades Part 3: Carbide Grades for Wear Parts
GB/T 3488-1983 Metallographic Determination of the Microstructure of Carbides
GB/T 3489-1983 Metallographic Determination of the Pores and Uncombined Carbon in Carbides
GB/T 9217.2-2005 Carbide Rotary Files Part 2: Cylindrical Rotary Files (Type A)
GB/T 9217.3-2005 Carbide Rotary Files Part 3: Cylindrical Ball Nose Rotary Files (Type C)
GB/T 9217.4-2005 Carbide Rotary Files Part 4: Ball Shaped Rotary Files (Type D)
GB/T 9217.5-2005 Carbide Rotary Files Part 5: Oval Shaped Rotary Files (Type E)
GB/T 9217.6-2005 Carbide Rotary Files Part 6: Arc Shaped Ball Nose Rotary Files (Type F)
GB/T 9217.7-2005 Carbide Rotary Files Part 7: Arc Shaped Pointed Rotary Files (Type G)
GB/T 9217.8-2005 Carbide Rotary Files Part 8: Torch Shaped Rotary Files (Type H)
GB/T 9217.9-2005 Carbide Rotary Files Part 9: 60° and 90° Cone Shaped Rotary Files (Types J and K)
GB/T 9217.10-2005 Carbide Rotary Files Part 10: Cone Shaped Ball Nose Rotary Files (Type L)
GB/T 9217.11-2005 Carbide Rotary Files Part 11: Cone Shaped Pointed Rotary Files (Type M)
GB/T 9217.12-2005 Carbide Rotary Files Part 12: Inverted Cone Shaped Rotary Files (Type N)
GB/T 9217.1-2005 Carbide Rotary Files Part 1: General Technical Conditions
GB/T 3848-1983 Determination of Coercive Force of Carbides
GB/T 3849-1983 Rockwell Hardness Test Method for Carbides (Scale A)
GB/T 3850-1983 Determination of Density for Dense Sintered Metal Materials and Carbides
GB/T 3851-1983 Determination of Transverse Rupture Strength for Carbides
GB/T 20255.5-2006 Chemical Analysis Method for Carbides: Determination of Chromium Content by Flame Atomic Absorption Spectrometry
GB/T 20255.2-2006 Chemical Analysis Method for Carbides: Determination of Cobalt, Iron, Manganese, and Nickel Content by Flame Atomic Absorption Spectrometry
GB/T 20255.3-2006 Chemical Analysis Method for Carbides: Determination of Molybdenum, Titanium, and Vanadium Content by Flame Atomic Absorption Spectrometry
GB/T 20255.4-2006 Chemical Analysis Method for Carbides: Determination of Cobalt, Iron, Manganese, Molybdenum, Nickel, Titanium, and Vanadium Content by Flame Atomic Absorption Spectrometry
GB/T 20255.1-2006 Chemical Analysis Method for Carbides: Determination of Calcium, Potassium, Magnesium, and Sodium Content by Flame Atomic Absorption Spectrometry
GB/T 5163-2006 Determination of Density, Oil Content, and Open Porosity for Permeable Sintered Metal Materials (Excluding Carbides)
GB/T 5242-2006 Inspection Rules and Test Methods for Carbide Products
GB/T 5243-2006 Marks, Packaging, Transportation, and Storage of Carbide Products
GB/T 9062-2006 Carbide Slotting Milling Cutters
GB/T 10947-2006 Carbide Taper Shank Twist Drills
GB/T 10948-2006 Carbide T-Slot Milling Cutters
GB/T 5124.3-1985 Chemical Analysis Method for Carbides: Determination of Cobalt Content by Potentiometric Titration
GB/T 5124.4-1985 Chemical Analysis Method for Carbides: Determination of Titanium Content by Peroxide Photometry
GB/T 5159-1985 Determination Method for Dimensional Changes in Metal Powders (Excluding Carbide Powders) Related to Compaction and Sintering
GB/T 5167-1985 Determination of Resistivity for Sintered Metal Materials and Carbides
GB/T 2078-2007 Dimensions of Carbide Indexable Inserts with Rounded Holes
GB/T 2080-2007 Dimensions of Carbide Indexable Inserts with Rounded Recesses
GB/T 21182-2007 Carbide Waste
GB/T 5318-1985 Impact Test Specimens for Sintered Metal Materials (Excluding Carbides) Without Notches
GB/T 5124.1-2008 Chemical Analysis Method for Carbides: Determination of Total Carbon Content by Gravimetric Method
GB/T 5124.2-2008 Chemical Analysis Method for Carbides: Determination of Insoluble (Free) Carbon Content by Gravimetric Method
GB/T 16770.2-2008 Solid Carbide Straight Shank End Mills Part 2: Technical Conditions
GB/T 2527-2008 Carbide Teeth for Mining and Oil Drilling Bits
GB/T 16456.2-2008 Carbide Helical Tooth End Mills Part 2: 7:24 Taper Shank End Mills Types and Dimensions
GB/T 16456.4-2008 Carbide Helical Tooth End Mills Part 4: Technical Conditions
GB/T 16456.9-2010 Carbide Electronic Cutting Tools: Lead Cutter Blades and V-CUT Blades Dimensions and Types
GB/T 16456.3-2008 Carbide Helical Tooth End Mills Part 3: Morse Taper Shank End Mills Types and Dimensions
GB/T 16456.1-2008 Carbide Helical Tooth End Mills Part 1: Straight Shank End Mills Types and Dimensions
GB/T 16770.1-2008 Solid Carbide Straight Shank End Mills Part 1: Types and Dimensions
GB/T 3612-2008 Carbide Blanks for Gauges and Measuring Tools
GB/T 6110-2008 Types and Dimensions of Carbide Drawing Dies
GB/T 20255.6-2008 Chemical Analysis Method for Carbides: General Requirements for Flame Atomic Absorption Spectrometry
GB/T 11102-2008 Carbide Products for Geological Exploration Tools
GB/T 18376.1-2008 Carbide Grades Part 1: Carbide Grades for Cutting Tools
GB/T 3879-2008 Cermet Materials Blanks
GB/T 10417-2008 Technical Conditions and Test Methods for Tungsten Carbide Cermet Mechanical Properties
GB/T 14330-2008 Carbide Machine Clamp Three-Sided Milling Cutters
GB/T 14301-2008 Solid Carbide Saw Blade Milling Cutters
GB/T 4251-2008 Carbide Machine Reamers
GB/T 6883-1995 Carbide Blanks for Wire, Rod, and Tube Drawing Dies
GB/T 6885-1986 Sampling and Test Methods for Carbide Mixture Powder
GB/T 11101-2009 Carbide Round Rod Blanks
GB/T 23369-2009 Standard Test Method for Determining Magnetic Saturation (MS) of Carbides
GB/T 23370-2009 Compression Test Method for Carbides
GB/T 14388-2010 Carbide Circular Saw Blades for Woodworking
GB/T 6335.1-2010 Rotary and Rotary Percussive Carbide Construction Drills Part 1: Dimensions
GB/T 25667.1-2010 Solid Carbide Straight Shank Twist Drills Part 1: Types and Dimensions
GB/T 25667.2-2010 Solid Carbide Straight Shank Twist Drills Part 2: Types and Dimensions for 2° Helix Ground Straight Shank Twist Drills
GB/T 25667.3-2010 Solid Carbide Straight Shank Twist Drills Part 3: Technical Conditions
GB/T 6335.2-2010 Rotary and Rotary Percussive Carbide Construction Drills Part 2: Technical Conditions
GB/T 25670-2010 Carbide Spiral Tooth End Mills
GB/T 25666-2010 Carbide Straight Shank Twist Drills
GB/T 7963-1987 Tensile Test Specimens for Sintered Metal Materials (Excluding Carbides)
GB/T 7964-1987 Room Temperature Tensile Test for Sintered Metal Materials (Excluding Carbides)
GB/T 7997-1987 Vickers Hardness Test Method for Carbides
GB/T 26052-2010 Tubular Carbide Welding Rods
GB/T 26053-2010 Carbide Spray Welding Powder
GB/T 26054-2010 Recycled Carbide Mixture
GB/T 25992-2010 Dimensions of Solid Carbide and Ceramic Straight Shank Ball Nose End Mills
GB/T 26050-2010 Determination of Metal Element Content in Carbides by X-ray Fluorescence Analysis Fusion Method
GB/T 26051-2010 Determination of Sulfur and Carbon Content in Carbide Cobalt Powder by Infrared Detection Method
GB/T 26280-2010 Integral Carbide Rock Drill Bits
GB/T 3849.2-2010 Rockwell Hardness Test (Scale A) for Carbides Part 2: Preparation and Calibration of Standard Blocks
GB/T 28248-2012 Carbide Drills for Printed Circuit Boards
GB/T 11108-1989 Determination Method for Thermal Diffusivity of Carbides
GB/T 1817-1995 Impact Toughness Test Method for Carbides at Room Temperature